Quick Setup Checklist
Minimum Upload Speed: 2 Mbps
Minimum Download Speed: 5 Mbps
Maximum Latency: 100ms
Signal Strength
iPads require a strong and reliable connection to the web. Make sure you check your internet connection throughout all times of day and in all areas of the school campus. One of the perks of iPads is their mobility, so you need to make sure the signal strength is strong, reliable, and distributed evenly thought the entire school campus without sacrificing network speed. If you deploy 1,000 iPads then you need a wireless LAN that can handle all of them being connected simultaneously.
Detailed Network Requirements
Network Performance Specifications
Upload Speed: 2+ Mbps required for audio/video uploads
Download Speed: 5+ Mbps for prompt playback
Latency: Keep under 100ms
Packet Loss: Must be under 1%
Jitter: Maximum 30ms allowed
Wi-Fi Configuration
Recommended: 5 GHz network band
Required Signal Strength: Above -65 dBm
Ensure consistent coverage in testing areas
Required Network Access
Ports to Open:
TCP/UDP 80 (HTTP)
TCP/UDP 443 (HTTPS)
UDP 3478 (required only if using WebRTC)
Whitelist Extempore domains in SSL/TLS inspection
*.extemporeapp.com
Device Setup Requirements
📱 iPad Requirements:
iOS 13 or later
Clear background apps before testing
Troubleshooting Tips
Before Testing Sessions:
Run network diagnostic test
Use Extempore's Video Check Tool
Verify all ports are open
Test microphone and camera access
VPN Considerations:
Ensure VPN supports high-speed media traffic
Check for latency issues
Verify media stream access